Sveinn Ólafsson on the Cold Fusion Now! podcast

Dr. Sveinn Ólafsson is the guest on the Cold Fusion Now! podcast with Ruby Carat. Dr. Ólafsson works with a form of Rydberg matter called ultra-dense hydrogen which could be related to the cold fusion/LENR reaction.


Listen to the Cold Fusion Now! podcast with Dr. Sveinn Ólafsson on the Podcast page.


Dr. Ólafsson received his Ph.D. from Uppsala University and is currently a research professor at the School of Engineering and Natural Sciences at University of Iceland. He had a career in hydrogen storage before Andrea Rossi sparked his interest in cold fusion.

“In the evenings, I just started to read”, says Dr. Ólafsson, “and I googled, by chance, ‘dense hydrogen‘, and up came Leif Holmlid. ”

He describes how Dr. Leif Holmlid was researching Rydberg matter and discovered a new state of “ultra-dense hydrogen”.

“What was so intriguing was the short distance between two protons that he claimed. I started contact with him shortly after that, and that is the start of any experimental work I have done in this field.”

“He’s been the only guy doing this, except with a few graduate students initially, but he retired a few years ago. Since then, he has been alone, and after I contacted him, there was two of us then in the beginning, and then Sindre came later.”

Drs. Sveinn Olafsson (L) and Leif Holmlid (R). Photo from Experimental Techniques for Studying Rydberg Matter of Hydrogen by Sveinn Olafsson from the 2019 CF/LANR Colloquium at MIT

He uses a very common techniques which is time of flight spectroscopy, or sometimes time of flight mass spectroscopy. This is widely used in all kinds of chemistry experiments. “

“What is different here, is that Leif has a different production unit of ions – or sample – which he is studying. So he was initially just interested in the Rydberg states of atoms, and this whole time, he has been improving techniques to study that.”

“And by chance he noticed that the time of flight was too short, actually, so that started the ultra-dense hydrogen.”

In time of flight, he is referring to is the time it takes a particle from the sample region to be ejected and travel down a tube to a detector some distance away after being stimulated by a laser. Dr. Ólafsson explains the process.

“What the laser is doing, since it has wavelength of say 1 micron, it’s actually letting zillions of electrons and protons to oscillate. So it’s joggling something there, and these millions of particles somehow react and something flies out.”

Time of Flight Set-up. Slide from Experimental Techniques for Studying Rydberg Matter of Hydrogen by Sveinn Olafsson from the 2019 CF/LANR Colloquium at MIT.

“The time-of flight is measured initially in the normal state of hydrogen Rydberg matter. When the laser breaks up these clusters, the individual atoms travel apart because of the positive charges. Some times of flight are so short, that the energy, or the closeness of these two entities, is so close, they would have to be 2.3 picometers apart initially – that is the ultra-dense state.”

“But also at the same time, you can see they were close at normal chemical distances also. So you can see both the normal state and the dense state using the same instrument. What is different is that in one case you’re having time of flight in microseconds, and the next you have time of flight in nanoseconds, or that range.”

“Time of flight is a technique used in normal chemistry all the time. You hit it with a laser and these chemical entities fly apart, usually just 5 eV, and that’s it. ”

“Leif is using the energy of 630 eV, which is quite high, and no chemist or physicist will accept that you have such bonding distance, or bonding energy, in any molecule, or any states, because quantum physics says that state is unbound and not stable.”

Leif Holmlid was using higher laser energy stimulation to perform a common experiment, and it turns out that his choice of sample catalyst may have led to the surprising outcome of an ultra-dense state for hydrogen.

Dr. Ólafsson says, “Before that, he had been studying different easy metals like potassium which is easy to study and easy to produce Rydberg states, and I think by chance, he used catalysts that could do similar things to hydrogen as to potassium.”

“Hydrogen has a very high ionization energy compared to potassium and all these alkali metals, so it is very strange that you could make a a Rydberg state of hydrogen just by catalysts.”

“Leif started first with a common catalyst, the one making all this plastic waste that you find in nature now. This catalyst is one the steps of making polyethylene plastics.”

“So there are tens of millions of tons of this catalyst made every years, just to make plastics. But if you put some styrene in, then you’re changing some atoms on that molecule. That catalyst is usually a very hollow material, or nano-porous, so you basically have a huge surface area in the catalyst, which just makes the production better.”

Graphic of Rydberg formation. Slide from Experimental Techniques for Studying Rydberg Matter of Hydrogen by Sveinn Olafsson from the 2019 CF/LANR Colloquium at MIT.

“Basically this is a nano-porous surface, and what is probably going on is that hydrogen is adsorbed on that surface, and we’ve been discussing that this is just a special surface where you can prime the hydrogen to have a Rydgberg state as the lowest energy due to the potassium ions which are on the surface also.”

“This is a mixture of ironoxide – rust – and potassium, and it’s well known that when you put oxide surfaces with potassium, the three electrons from potassium forms a kind of electro-gas on top of the surface. “

“So this has never been studied or calculated because it’s very complicated to do it since the orbit of the Rydberg state is huge. It would make the Rydberg atom in a Rydberg state, which has a circular orbit with high quantum numbers – if it is an atom.”

“You can not do that easily to hydrogen, but on the surface, you could make a joint cooperation between the surface and the hydrogen. These may join up on the surface and give us the first states of this process, which is just the normal hydrogen Rydberg matter which is the feeding matter for the ultra-dense state.”

“You have this feedstock which is the normal hydrogen Rydberg matter, and through some excitation, it’s actually more thermodynamically stable to go into the other phase, but not so greatly, so that can obviously form some thin layers on top of metals, and that has been seen in experiments of ultra-dense state, which has so many forms creeping on the surface, and can even live for days if you leave it in the chamber there.”

“It’s actually fairly easy to prove this is true between two protons in a course of quantum physics, and I totally agree on that viewpoint.”

“But nobody knows what you can say if you are trying to do this with, say 15 or 19 particles, because that theory is not so easily solved. It’s not so easy either to say that it is not possible.”

“Most people use the simple way out and say it’s impossible and nonsense, because they are using so simple a model; they are not using multi-particle physics.”

For the ultra-dense state of hydrogen, Dr. Ólafsson says that “it’s always in that range of 2.3 pm. Leif reports that sometimes it’s a little bit less, and sometimes higher. He has given indication that this material has different spin states.”

“The only problem with is that the theory describing it is an empirical model, so it has no support from quantum calculations. It is describing his results, so we can say there are excited states which are a little bit longer distances and so on.”

“Since Leif Holmlid is the only man who has been doing this, we are replicating some parts of his work, but so far, we have not been studying the 2.3 picometer much. We’ve only been studying the ultra-fast breakup, when we have a higher time of flight. It’s not actually a bound state, but it’s actually flying out with much higher energy.”

Slide from Experimental Techniques for Studying Rydberg matter of Hydrogen by Sveinn Olafsson from the 2019 CF/LANR Colloquium at MIT

“At the moment we are just trying to catch up with Leif. We have put the labs together, and we are trying to replicate some of his work, because according to him, we are the first experimentalists who have contacted him and tried to replicate things.”

“It’s actually a nice story to tell that I had applied for some money from the Icelandic Research Council here, and the main argument from all the reviewers was that “nothing has been published except him, and, if this were to be true it would possibly be quoted in the highest scientific journals’. So actually it was a catch-22; they believe all these claims are so wonderful, that somebody must have already studied it, but nobody has! It’s not good to be #2 in applying.”

“I managed to get funding, it was from a Technological Development fund. They are less bound to what science is and is not.”

Asked if he thought that ultra-dense hydrogen could be behind the cold fusion reaction, Dr. Ólafsson said that was his original thought when he saw Leif’s research.

“I thought, this is so close, this must be cold fusion. But it is so complicated a behavior, and of course, getting experiments in cold fusion and experiments in Leif’s research, to join up is of course difficult because they’re in different surroundings.”

“When I contacted Leif and asked him if he thought this was possibly behind cold fusion, he was skeptical, and didn’t want to be linked to the cold fusion thing.”

“But I managed to make a simple calculation with this distance of 2.3 picometer and some simple assumption, and it gave me that the rate of this distance could be enough. But it has one problem, because if you have this tunneling mechanism at this distance, like muon-catalyzed fusion, then you should still see the same result. In other words, you should get radioactive neutrons and protons. So these particles trying to tunnel in close to each other, that is not the right physics [for cold fusion].”

“But Rydberg matter and ultra-dense physics gives us the opportunity to study multi-particle interactions. In a sense, it tells us, if there is a link (between LENR and ultra-dense hydrogen), then it’s a multi-particle tunneling or interaction which could be making cold fusion signals.”

“I don’t know any samples without a crack or opening. Foil has cracks and so on, so you don’t know. I think there is nothing denying that ultra-dense hydrogen is in all cold fusion experiments.”

After being schooled in ultra-dense hydrogen production, Ruby asked Dr. Ólafsson how it was working with graduate student Sindre Zeiner-Gundersen in Norway, who received the test reactor from Tadahiko Mizuno last year.

“Well Sindre is not quite so young a student, he’s in his 30s, so that makes the game easier, you could say! Sometimes, he’s the student, and sometimes, I’m the student.”

“Since we are building one lab in Norway, and one lab in Iceland, which is a little bit different lab, he’ll makes something in his lab, and I catch up with that, and I do the same here, vice versa. ”

“And then we are traveling to each other’s lab, and I’ve been here three years already, and a PhD should be over in three years, but we have the problem of wanting to see more, and do more. So we are always joking ‘when will he finish his PhD?’!”

“It’s a nice thing when you have started in a different field, and one day you kind of get bored, when you start doing the same thing over and over again.”

“So the main reason for me to join this field was out of curiosity, and to see what could be done differently from these nickel and palladium-type experiments.”

“And I think along this way, from 2011 to 2019, you read so many different fields, that you are suddenly becoming not an expert, you know something of everything in the end, and that has been the most enjoyable part of this project.”

“But I’ve still been doing a bit of what I’ve always done. Like I have projects at CERN with a large international group, where we meet up once a year and do a well known technique. It’s not cold fusion, but it’s nice.”

“And there’s another project here which I take part in where we try to find catalysts for ammonia production, so it’s a little bit of everything.”

Dr. Ólafsson’s colleagues have followed the journey. He says, “At the moment they’re so used to it – seven years later! They just smile, yeah, yeah, yeah…”

“I gave a talk last week at the Icelandic Physical Society about what is going on in this field here. And my closing words were, ‘If you’re confused, you’re not alone, I’m also confused as you’.”

“I was just presenting experimental facts, and strange ones. ”

“I think scientists are much more open – until they have read the applications – and then they get scared!”

Listen to the Cold Fusion Now! podcast with Dr. Sveinn Ólafsson on the Podcast page.

See Experimental Techniques for Studying Rydberg Matter of Hydrogen by Sveinn Ólafsson from the 2019 LANR/CF Colloquium at MIT.

Swedish District Heat Is A Perfect Fit For Cold Fusion

Original article on Atom-Ecology here.

Cold fusion is a technology that has arrived in practical form, and that practical form is simple district heat.

Chilly Stockholm Uses District Heating
Chilly Stockholm Uses District Heating
It’s strange that so many people think of energy only as electricity to power devices or petrol to fuel a vehicle. Anything short of those most convenient energy sources is treated as if it’s all but useless, certainly not interesting.

This attitude reveals a common human failing that equates manly power with all forms of power. If you can’t fuel a testosterone mutant power machine you are nothing. Fast cars and faster computer video games is what a preponderance of internet ruled media and chat room discussions are all about.

But our human society runs on simple heat. And where it comes to the economics of heat it matters not what the source of the ΔT (extra degrees of temperature) comes from it matters what each degree of ΔT costs!

Dr. Stanley Pons and Dr. Martin Fleischmann
Dr. Stanley Pons and Dr. Martin Fleischmann
Martin Fleischmann knew this very well and his design of his “boiling cell” was just that, a constantly boiling cold fusion cell. Had Martin stacked hundreds of his boiling cells into a common container and done the engineering to manage the heat we’d likely be using his branded cold fusion as a simple boiling water and steam heat source today.

But Martin was a professor and bench chemist and he was more keenly interested in understanding the mysteries of his discovery than engineering practicalities.
glowing hotcat

Recently our friend Andrea Rossi in Italy has shocked the world with his start of delivery of megawatt cold fusion heat machines. Some of his designs produce very high temperatures as evidenced by the glowing red/orange Hot-CAT devices witnessed by many.

Hot cat at 600-800C.
Hot cat at 600-800C.
But equally if not more interesting are his lower temperature devices which operate with high efficiency, producing 6 times the energy output in hot water as the energy input to run the devices.

At a design output temperature of 120° C many gadflys and pundits trolling the Internet chat rooms and media eschew this “low temperature” output and worse they bemoan it isn’t even electricity. But Rossi and his team have ignored what Rossi calls “the snakes of the internet” and moved ahead in a pragmatic and practical energy engineering and product delivery process.

Heat is heat and if you have a system that needs a million joules of heat at 120° C then Rossi’s machine is the “cats meow.” If you need 1.5 million joules and Rossi’s machine can give you 2/3′s of that energy on the cheap and you have to burn some conventional fuel to get the last 0.5 megajoules then you are still saving an enormous amount of money on your total fuel bill.

1MW thermal E-Cat on its way to Customer
1MW thermal E-Cat on its way to Customer
So now there is an offer to install one of Rossi’s E-CAT cold fusion thermal units in Sweden as a demonstration. A Swedish group is backing the installation, as a proof of commercial principal, in cooperation with some Swedish energy company. They are inviting applications from one and all.

Why Sweden? The answer is very clear. Sweden is one of the many countries that has district heat.

District heat is generated in a centralized location for residential and commercial heating requirements such as space heating and water heating. The heat is often obtained from a cogeneration plant burning fossil fuels but increasingly biomass. Although heat-only boiler stations, utilizing geothermal heating and central solar heating are also used, as well as nuclear power.

District heating plants provide higher efficiencies and better pollution control than localized boilers. According to some research, district heating with combined heat and power (CHPDH) is the cheapest method of cutting carbon emissions, and has one of the lowest carbon footprints of all fossil generation plants.

Insulated steam pipes
Insulated steam pipes
District heating system is a vital part of the total energy supply of Stockholm. Almost 60 percent of the customers of the city’s total heat market have chosen district heat.

Throughout Europe many cities choose district heat as a major part of their energy grid. It’s not electrical, it’s hot water and steam heat moved through the city in insulated pipelines much like natural gas but with many advantages.

District heating and cooling plays an important role in the supply of low-carbon heating and cooling in Europe. While having just an average market share of 10 percent in all of Europe, it is much more widespread in North, Central and Eastern Europe, where market shares often reach 50 percent and more. On average, over 80 per cent of heat supplied by district heating originates from renewable energy sources or heat recovery (i.e. from electricity production or industrial processes).

A European Commission confirms the possibility of saving an extra 400 million tonnes of CO2 yearly (corresponding to 9.3% CO2 reduction – thus more than the whole Kyoto target!) with more District Heating and Cooling across 32 European countries. These CO2 savings are projected just from switching to “district heating” using conventional fuels. With cold fusion the CO2 savings might approach 2 billion tonnes of CO2 saved.

As cold fusion heat is added to the expansion of district heating Europe may have a very energy efficient and clean energy future. The time required to implement this cold fusion energy source is incredibly fast, years not decades.

Top